Cracking job on the Cuirassiers! That 60mm base really gives a great, dense massed-cavalry effect on the table. You've got me puzzling over what's peculiar—is it that there are two flags per regiment on those bases? and it should be one.
Wonderful brushwork, Richard. Hard to believe that these are 6mm figures. Now for your challenge. Looking at the composition, there are things I see that may not be intended. Let me give it a shot... - One regiment has black over yellow plumes as expected but the second appears to have solid black plumes. - Standard poles are not "barbershop" striped, too long, and the top is a ball rather than spear point. Not that I would paint them striped either! - Standards are much too large for cavalry. - If this is a regiment then the distribution of colors is wrong. That is, first squadron carries the Leibstandarte and other squadrons carry the Ordinarstandarte.
You are spot on with the plumes. Well done, Norm. The plumes are tiny bits of thin card cut and stuck on the hats. It was only after I'd done the gluing that I realised my mistake. But to remove the plumes would destroy the head. So, they stayed. One unit with plumes on the left and the other with the plumes on the left hand side.
These really do look lovely en masse Richard - as for the plumes - just one of those strange and idiosyncratic regimental traditions the Colonel of the regiment instituted! (Like you, they probably just misread a uniform regulation - but having turned up for parade with the plumes in the wrong place, they decided to double down and retain it as a regimental distinction and still wearing them that way in 2026!)
Super work Richard! A great result for 6mm figures. I'm pretty sure no one will spot the plumes issue unless you tell them 😁 And speaking from experience you are not the only one to glue something on the wrong side, or in my case, upside down or both 😂
I can't spot the goings on? But the troops do look rather splendid!!!!
ReplyDeleteCheers Ray
DeleteHi,
ReplyDeleteCracking job on the Cuirassiers! That 60mm base really gives a great, dense massed-cavalry effect on the table. You've got me puzzling over what's peculiar—is it that there are two flags per regiment on those bases? and it should be one.
Cheers, Andy
Much appreciated, Andrew. Purists might say it's the flags, but these is some licence taken as each is a regiment.
DeleteThese are really well done. Your brush work on a semi flat is excellent. Like the others I don't notice anything peculiar.
ReplyDeleteThank you very much.
DeleteWonderful brushwork, Richard. Hard to believe that these are 6mm figures. Now for your challenge. Looking at the composition, there are things I see that may not be intended. Let me give it a shot...
ReplyDelete- One regiment has black over yellow plumes as expected but the second appears to have solid black plumes.
- Standard poles are not "barbershop" striped, too long, and the top is a ball rather than spear point. Not that I would paint them striped either!
- Standards are much too large for cavalry.
- If this is a regiment then the distribution of colors is wrong. That is, first squadron carries the Leibstandarte and other squadrons carry the Ordinarstandarte.
You are too kind, Jonathan.
DeleteI reserve the barbetshop poles for infantry. You are close with the plumes.
Lovely work, and very attractive figures!
ReplyDeleteThank you, you are very kind to say so.
DeleteLovely work Richard
ReplyDeleteCheers, Neil.
DeleteSuper work on them Richard, they look great and the basing really works so well.
ReplyDeleteThank you, Donnie. The basing is pleasing.
DeleteLovely, I really had to do a double take when I read 6mm MDF!
ReplyDeletePeculiar - is it to with some headgear being the wrong way around with a mix of plumes being on the left and the right had side?
You are spot on with the plumes. Well done, Norm.
DeleteThe plumes are tiny bits of thin card cut and stuck on the hats. It was only after I'd done the gluing that I realised my mistake. But to remove the plumes would destroy the head. So, they stayed. One unit with plumes on the left and the other with the plumes on the left hand side.
Great work Richard!
ReplyDeleteThank you, Michal.
DeleteGreat little figures Richard, and they look terrific when based.
ReplyDeleteCheers, Lawrence.
DeleteLovely stuff Richard.
ReplyDeleteThank you, Chris.
DeleteMore of your mdf delights. So good!
ReplyDeleteBest wishes, James
Thank you, James.
DeleteThese really do look lovely en masse Richard - as for the plumes - just one of those strange and idiosyncratic regimental traditions the Colonel of the regiment instituted! (Like you, they probably just misread a uniform regulation - but having turned up for parade with the plumes in the wrong place, they decided to double down and retain it as a regimental distinction and still wearing them that way in 2026!)
ReplyDeleteThank you, Keith. That's funny. I think that I'll adopt that reason.
DeleteBeautifully painted there Richard:)! I would never have spotted the plume issue, which speaks volumes I'm sure;).
ReplyDeleteYou are too kind, Steve.
DeleteSplendid uints, I potted the plumes, but hadn't realised you were adding them. Are there any other additions to the basic figures?
ReplyDeleteThank you, Rob. Just the plumes and the addition of the flag poles.
DeleteThe cavalry units look really good. When I first looked at photos I thought they were 15mm and not 6mm.
ReplyDeleteSuper work Richard! A great result for 6mm figures.
ReplyDeleteI'm pretty sure no one will spot the plumes issue unless you tell them 😁
And speaking from experience you are not the only one to glue something on the wrong side, or in my case, upside down or both 😂
Thank you, Ben. I think that we all go a bit figure blind in the heat of battle.
Delete